7.23 ct Emerald Cut Lab Grown Diamond - IGI Certified
$2,644.00 USD
Skip to product information
7.23 ct Emerald Cut Lab Grown Diamond - IGI Certified
$2,644.00 USD
Shipping calculated at checkout.
Details & specifications
7.23 ct emerald cut, F color, VVS2, IGI certified, measuring 13.41 by 8.67 mm. A 1.55 length to width ratio.
The emerald cut has a long open table and no brilliant faceting to hide behind, so clarity is the grade that decides whether it works. VVS2 is well past the point where that is a question.
Length : width1.55
Depth68.7%
Table63%
Measurements13.41 × 8.67 × 5.96 mm
Details
- Shape
- Emerald Cut
- Carat
- 7.23 ct
- Pieces
- 1
- Color
- F
- Clarity
- VVS2
- Cut
- Very Good
- Polish
- Excellent
- Symmetry
- Excellent
- Fluorescence
- None
- Certificate
- IGI 691581110
Setting an emerald cut
Step cuts want clean geometry around them. Four prongs at the corners, or a bezel that follows the outline, and very little else. The classic alternative is a three stone with tapered baguettes or trapezoids either side, which continues the straight lines instead of interrupting them. Set east-west, the length runs across the finger and the stone reads wider than it is.
Reading the numbers
Emerald cuts run from about 1.30 to 1.60; at 1.55 this one is at the long classic end. The 68.7% depth is deep, which is normal for the cut and is where the corridor effect comes from, light travelling down through the steps and back rather than bouncing off a shallow face. The 63% table keeps that corridor visible instead of flattening it.
Common questions
Why does clarity matter more in an emerald cut?
The large open table works like a window, and step facets give light few places to scatter. Anything inside the stone has less to hide behind. VVS2 means nothing is locatable at ten times magnification, and the gap between VVS and VS only shows at that magnification.
Does an emerald cut sparkle?
Not the way a brilliant does. It returns light in broad planes that switch on and off as the hand moves, rather than in small points of fire.
What length to width ratio should an emerald cut have?
Between 1.30 and 1.60 covers almost all of them. Below 1.30 it starts to read square, above 1.60 it starts to read narrow.
Sold as a single piece. Verify IGI report 691581110
Care
To maintain the beauty and integrity of your purchase, we recommend treating it with care. Simple maintenance practices, such as gentle washing and proper storage, can effectively preserve the longevity of your favorites. We encourage you to refer to the care instructions included with each item, designed to help you keep your purchase in top condition.
Design
Our dedication to excellence extends beyond materials; it encompasses the artistry and craftsmanship illustrated in every piece we create.
You may also like
Questions about this piece
What gemstones are used in this piece?
This piece features lab-grown diamonds. Please see the product details for the stated stone weights, color, clarity and any additional gemstones.
What metal is used?
Please refer to the product details for the metal used in your selected variant. Contact us before ordering if a metal specification needs confirmation.
Where can I check the specifications?
The product details list the supplied specifications. Check whether a stone weight is stated per stone or for the whole piece. Contact us before ordering if a size, weight or material needs confirmation.
What certification is included?
This piece is labeled IGI certified. Please refer to the report details shown for the individual diamond; a report applies to the stone described in that report.
When will my piece arrive?
Estimated delivery: 30–45 calendar days for pre-orders. Please check the information for your selected piece before ordering. Shipping options and charges are shown at checkout.
What return terms apply?
Eligible items have a 30-day return request window under our refund policy. Special orders, personalized items, sale items and gift cards are excluded. Please confirm the terms for your piece before ordering.